Aluminium composite panel cladding for facades, elevations, showrooms and signage across Delhi NCR — with fire-rated (FR / A2) options specified where the building and NBC norms call for it.
A building's outer skin.
Aluminium composite panels — two thin aluminium skins bonded to a core — give a building a flat, modern, weatherproof face. They clad facades and elevations, wrap columns and canopies, and carry crisp signage for showrooms and offices.
The panel is only half the job. What keeps cladding safe and flat for years is the aluminium substructure behind it and the way joints are sealed — which is the part we take seriously.
Fire-rated vs standard ACP.
- ◆ Mineral-filled (FR) or non-combustible (A2) core
- ◆ The responsible choice for occupied & tall buildings
- ◆ Aligns with NBC fire-safety expectations
- ◆ What we recommend by default on facades
- ◇ Polyethylene core — lower cost
- ◇ Far more combustible than FR/A2
- ◇ Only for low-risk, low-rise, non-critical use
- ◇ We'll tell you honestly when it's not appropriate
Panel, coating & frame.
| Core | FR (mineral-filled), A2 (non-combustible) or standard PE — chosen by building risk and code. |
| Coating | PVDF for colour-fast exterior facades; solid, metallic, timber and stone-look finishes. |
| Substructure | Aluminium framing grid on brackets, set out for flatness, drainage and thermal movement. |
| Jointing | Open groove or sealed joint with weatherproof detailing — the difference between a facade that stays crisp and one that streaks. |
Priced by the square foot of facade.
The panel is rarely the biggest line — core grade and the substructure behind it usually are. Here's what a facade quote is built from.
Clad & sealed.
ACP FAQs.
For occupied and taller buildings, fire-rated FR (B1) or A2 non-combustible panels are the responsible choice and are increasingly expected under NBC fire norms. Standard PE-core ACP is cheaper but far more combustible; we advise FR/A2 wherever life-safety or code applies.
They do different jobs — ACP is a solid, opaque skin for elevations and signage; structural glazing is a glass system for light and views. Most facades use both, and we detail the junction so they line up.
Quality PVDF-coated panels hold colour for many years with little more than periodic washing. Longevity depends far more on the substructure and sealing than on the panel alone — which is where careful installation earns its keep.
All of Delhi NCR — Delhi, Gurgaon, Noida, Ghaziabad and Faridabad.
ACP is the solid part of an elevation. For the glazed part — curtain wall and structural glazing — see the facade page; the two are usually detailed together.